Contact us today! 833-333-4267

HANS™ Premium Water

The only whole-house water system that meets or exceeds standards set for bottled water.

Big asset protection.
Tiny cash outlay.

Contact our clean water experts today!
Call 833-333-4267
or fill out the form below

Get the most advanced water treatment system available for an affordable monthly fee and no minimum term.

HANS™ Premium Water offers No-Term Rentals.

In addition to providing ultra clean water, HANS™ Premium Water systems monitor water usage, TDS levels, filter life and more. They alert you when service is required so small problems don’t become expensive problems.

HANS™ has products for all your business’s needs including reverse osmosis, pre-treatment, post-treatment and pumps. HANS can handle everything from clean drinking water to asset protection to ultra-clean water and everything in between.

HANS™ Premium Water Appliance - Model 2

Reverse osmosis | Ultra-purification | Pre & post-treatment | Liquid transfer

Private Well Customers

Private well owners are responsible for the safety of their water. The Environmental Protection Agency does not regulate or enforce legal limits of contaminants found in private wells. It is up to the well owner to test and treat for these contaminants to ensure the safety and wellbeing of those using water from that source. Along with the common complaints amongst private well owners regarding the taste, smell, and appearance of their well water, that water could also contain levels of contaminants such as radioactive substances, metals or fluoride, agricultural chemicals, fertilizers, pesticides, and the list goes on. The U.S. Geological Survey released a report in 2009 finding that almost one-fourth of private domestic wells contain levels of these potentially harmful contaminants.

According to the Environmental Working Group, Substances found in groundwater and surrounding mineral deposits include:

Radioactive elements such as radium or uranium
Metals such as arsenic are commonly found in groundwater, particularly in the West, Midwest, & Northeast. The U.S. Geological Survey found that nearly 7 percent of private wells across the county have levels of arsenic above legal limits.
Fluoride occurs naturally in surface water & groundwater, and many public systems also add it to tap water, however, the Public Health Service recommends no more than 0.7 milligrams of fluoride per liter of water.
Nitrate, a fertilizer chemical, frequently contaminates drinking water due to agricultural & urban runoff, and discharges from municipal wastewater treatment plants & septic tanks.
Toxic pesticides commonly migrate into groundwater in agricultural areas.
Industrial products & wastes, which can contaminate groundwater from improper disposal, leaks from underground tanks, or leaching from landfills or waste dumps. Carcinogenic volatile organic compounds, (VOCs) can pollute private water wells near industrial sites or landfills.
Lead and copper, which can leach from pipes and plumbing fixtures due to the presence of corrosive compounds such as acids in groundwater. Homes built before 1986 are more likely to have lead pipes. If your water has a pH value of less than 7, or has other indicators of corrosive water, metals such as copper & lead can easily leach from pipes into water.
Microbes such as bacteria, viruses and other parasites, can contaminate wells from both natural and human-related activities.

When should I have my water tested?

The Centers for Disease Control and Prevention recommend regular mechanical maintenance & testing your well every spring. Regular testing is recommended because contaminant levels can change over time. You should also test your well:

Before you use it for the first time
If someone in your household is pregnant or nursing
If there are known problems with well water in your area
If your household plumbing contains lead
If there has been flooding or other land disturbances in your area
After you repair any part of your well system
If you notice changes in the taste, color, or odor of your water.

What should I do if contaminants are detected?

The Hans Premium Water appliance removes the following contaminants:

Third Party Test Results

Third party tested by IAMPO at: QFT Laboratory, LLC Wilmington, Delwawa - NELAC

Contaminant	NSF/ANSI 58 Testing Standard	Concentration Tested	HANS™ Premium Water Results	Reduction of Up To
Hardness	<187 ppm (11 gpg)	600 ppm (35 gpg)	<1 ppm	99.9%
TDS	<187 ppm	785 ppm	40 ppm	94.9%
Lead	<10 ppb	139 ppb	<1 ppb	99.3%
Fluoride	<1.5 ppm	7.54 ppm	0.8 ppm	89.4%
Iron (ferric and ferrous)	<0.3 ppm	3.46 ppm	.018 ppm	99.5%
PFOA & PFOS	70 ppt	25,000 ppt	7 ppt	99.9%
Arsenic (A3 and A5)	<10 ppb	52.4 ppb	<1 ppb	98.1%
Nitrate	<10 ppm	27.9 ppm	0.9 ppm	96.8%
Nitrite	<1 ppm	3.3 ppm	0.2 ppm	93.9%
Chromium 6+	<100 ppb	304 ppb	<1 ppb	99.7%

*Chloroform surrogate test includes the following chemicals: alachlor, atrazine, benzene, carbofuran, carbon tetrachloride, chloropicrin, dibromochloropropane, o-dichlorobenzene, p-dichlorobenzene, 1,2-dichloroethane, trans-1,2-dichloroethylene, 1,2-dichloropropane, cis-1,3-dichloropropylene, dinoseb, endrin, ethylbenzene, ethylene dibromide, haloacetonitriles, bromochloroacetonitrile, dibromoacetonitrile,
dichloroacetonitrile, trichloroacetonitrile, haloketones, 1,1-dichloro-2-propanone 1,1,1-trichloro-2-propanone, heptachlor, heptachlor epoxide, hexachlorobutadiene, hexachlorocyclopentadiene, lindane, methoxychlor, pentachlorophenol, simazine, styrene, 1,1,2,2-tetrachloroethane, tetrachloroethylene, toluene 1, 2,4,5-TP, tribromoacetic acid, 1,2,4-trichlorobenzene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, trichloroethylene, trihalomethanes, chloroform, bromoform, bromodichloromethane, chlorodibromomethane, and xylenes.

The HANS™ Premium Water Appliance purifies your water ….

In addition to purifying your water to better-than-bottled-water quality from every tap in your home, a HANS™ unit will render your water softener useless without the hassle, cost, and negative environmental impact of salt, which leads to brine discharge back into your septic system, discharged underground into a drywell, or piped out of the building to the ground surface.

Where can I find additional resources?

For more information visit hanspremiumwater.com or call 833-333-HANS to schedule an in-home water consultation.
You can compare your water test results to EWG’s Drinking Water Standards, which reflect the best & most current science about health risks of contaminants, instead of government regulations that are often based on political and economic compromises or outdated studies.
The EPA’s list of state resources & programs for private well owners