One of our dealer representatives will be following up with you shortly about the HANS™ Premium Water Appliance.
Use the form below to get in touch with us or call us at 833-333-4267. We’re here to help.
*required fields
We currently do not have any dealers in your area at this time. Contact us today so that we can help find a dealer for you!
Private well owners are responsible for the safety of their water. The Environmental Protection Agency does not regulate or enforce legal limits of contaminants found in private wells. It is up to the well owner to test and treat for these contaminants to ensure the safety and wellbeing of those using water from that source. Along with the common complaints amongst private well owners regarding the taste, smell, and appearance of their well water, that water could also contain levels of contaminants such as radioactive substances, metals or fluoride, agricultural chemicals, fertilizers, pesticides, and the list goes on. The U.S. Geological Survey released a report in 2009 finding that almost one-fourth of private domestic wells contain levels of these potentially harmful contaminants.
According to the Environmental Working Group, Substances found in groundwater and surrounding mineral deposits include:
When should I have my water tested?
The Centers for Disease Control and Prevention recommend regular mechanical maintenance & testing your well every spring. Regular testing is recommended because contaminant levels can change over time. You should also test your well:
What should I do if contaminants are detected?
The Hans Premium Water appliance removes the following contaminants:
| Contaminant | NSF/ANSI 58 Testing Standard | Concentration Tested | HANS™ Premium Water Results | Reduction of Up To |
|---|---|---|---|---|
| Hardness | <187 ppm (11 gpg) | 600 ppm (35 gpg) | <1 ppm | 99.9% |
| TDS | <187 ppm | 785 ppm | 40 ppm | 94.9% |
| Lead | <10 ppb | 139 ppb | <1 ppb | 99.3% |
| Fluoride | <1.5 ppm | 7.54 ppm | 0.8 ppm | 89.4% |
| Iron (ferric and ferrous) | <0.3 ppm | 3.46 ppm | .018 ppm | 99.5% |
| PFOA & PFOS | 70 ppt | 25,000 ppt | 7 ppt | 99.9% |
| Arsenic (A3 and A5) | <10 ppb | 52.4 ppb | <1 ppb | 98.1% |
| Nitrate | <10 ppm | 27.9 ppm | 0.9 ppm | 96.8% |
| Nitrite | <1 ppm | 3.3 ppm | 0.2 ppm | 93.9% |
| Chromium 6+ | <100 ppb | 304 ppb | <1 ppb | 99.7% |
*Chloroform surrogate test includes the following chemicals: alachlor, atrazine, benzene, carbofuran, carbon tetrachloride, chloropicrin, dibromochloropropane, o-dichlorobenzene, p-dichlorobenzene, 1,2-dichloroethane, trans-1,2-dichloroethylene, 1,2-dichloropropane, cis-1,3-dichloropropylene, dinoseb, endrin, ethylbenzene, ethylene dibromide, haloacetonitriles, bromochloroacetonitrile, dibromoacetonitrile,
dichloroacetonitrile, trichloroacetonitrile, haloketones, 1,1-dichloro-2-propanone 1,1,1-trichloro-2-propanone, heptachlor, heptachlor epoxide, hexachlorobutadiene, hexachlorocyclopentadiene, lindane, methoxychlor, pentachlorophenol, simazine, styrene, 1,1,2,2-tetrachloroethane, tetrachloroethylene, toluene 1, 2,4,5-TP, tribromoacetic acid, 1,2,4-trichlorobenzene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, trichloroethylene, trihalomethanes, chloroform, bromoform, bromodichloromethane, chlorodibromomethane, and xylenes.
The HANS™ Premium Water Appliance purifies your water ….
In addition to purifying your water to better-than-bottled-water quality from every tap in your home, a HANS™ unit will render your water softener useless without the hassle, cost, and negative environmental impact of salt, which leads to brine discharge back into your septic system, discharged underground into a drywell, or piped out of the building to the ground surface.
Where can I find additional resources?
[hpw]
* All health risk information provided in the above contaminant lookup utility is provided by the Environmental Working Group. More information can be found at EWG.org.